[LB050473], Letter from John F Ott to New Jersey and Pennsylvania Concentrating Works, George F Atwood, July 28th, 1891
https://edisondigital.rutgers.edu/document/LB050473
→ View document with UniversalViewer → View document on Archive.org → Re-use this digital object via a IIIF manifest
Title
[LB050473], Letter from John F Ott to New Jersey and Pennsylvania Concentrating Works, George F Atwood, July 28th, 1891
Author
Date
1891-07-28
Type
Subject
Folder/Volume ID
LB050-F
Microfilm ID
142:451
Document ID
LB050473
Publisher
Thomas A. Edison Papers, School of Arts and Sciences, Rutgers University
Has Version
Item sets
Transcription
July 28, 1891.
Mr. George F. Atwood.
N.J. & Penn’s. Concentrating Works,
Ogdensburgh, N.J.
Dear Sir:-
The casting of the 300 h.p. Condenser is finished, but it does not look good. It has three defects, as follows:
There is a small piece of flange.
S small blow hole in other flange.
The core of shaft seat for regulating valve is half an inch out of centre.
What will you do this casting? Accept it, or have them make a new casting. In order to make a new casting it will be necessary to revisit the whole pattern.
Yours truly,
John Ott.
M.
Mr. George F. Atwood.
N.J. & Penn’s. Concentrating Works,
Ogdensburgh, N.J.
Dear Sir:-
The casting of the 300 h.p. Condenser is finished, but it does not look good. It has three defects, as follows:
There is a small piece of flange.
S small blow hole in other flange.
The core of shaft seat for regulating valve is half an inch out of centre.
What will you do this casting? Accept it, or have them make a new casting. In order to make a new casting it will be necessary to revisit the whole pattern.
Yours truly,
John Ott.
M.